Engineering and Technology - Research article Open Access Logo

STABILSING THE ELECTRIC CURRENT FOR THE SUN-ENERGY RIDDEN GENERATOR TO LOAD INTO A GRID

Anh Viet Truong 1, *
Thuan Ba Nguyen 2
  1. University of Technical Education, HCM City
  2. Lac Hong University
Correspondence to: Anh Viet Truong, University of Technical Education, HCM City. Email: pvphuc@hcmuns.edu.vn.
Volume & Issue: Vol. 13 No. 4 (2010) | Page No.: 74-82 | DOI: 10.32508/stdj.v13i4.2170
Published: 2010-12-30

Online metrics


Statistics from the website

  • Abstract Views: 2280
  • Galley Views: 2601

Statistics from Dimensions

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

This paper presents a solar power source coupling model, as well as other distributed power resoures at households which are synchronized with distributive electrical grid. This synchronization uses frequency tracking control method, electrical grid voltage as well as solar power source. Investigation result of the method on the model recognizes that current stability capacity injects electrical grid to disregard voltage and frequency changes or direct source voltage of inverter system is reduced or increased. Besides, the model is capable of reducing creative power transmitting into electrical in order to take advantage of capacity of electronic interlocking of the inverter when transmitting active power.

Comments