Open Access 
Downloads
Download data is not yet available.
Abstract
Ag-Cd alloys are deposited in an electroplating bath containing potassium cyanide and alizarin oil under suitable conditions. The influences of additives, [Ag+]/[Cd2**] ratio, current density and temperature on the deposit composition and cathode current efficiency were investigated. The resistance to abrasion, hardness, and contact resistance of the electrodeposited Ag-Cd coating depend on Ag content in alloy. The Ag content in alloy should be used from 45% to 60% for slide-contact points and from 70% to 90% for fixed contact points.
Author's Affiliation
Article Details
Issue: Vol 10 No 3 (2007)
Page No.: 27-36
Published: Mar 31, 2007
Section: Article
DOI: https://doi.org/10.32508/stdj.v10i3.2760
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Loc, N., & Hien, T. (2007). ELECTROPLATING OF Ag-Cd ALLOY FOR MAKING AND REPAIRING CONTACT POINTS. Science and Technology Development Journal, 10(3), 27-36. https://doi.org/https://doi.org/10.32508/stdj.v10i3.2760
Download Citation
Cited by
Article Statistics
HTML = 953 times
Download PDF = 336 times
Total = 336 times
Download PDF = 336 times
Total = 336 times
