Open Access 
Downloads
Download data is not yet available.
Abstract
On the basis of a computer simulation circulation zones are formed in a rotational streamline in a chamber, the inlet of which suddenly becomes wider. The geometry of the chamber imitates a device, working with gas fuel and with central gas feed. As a result angular and axial circulation zones were formed and it is also presented how the gas feeding pipe sizes and the degree of swirl influence their dimensions.
Author's Affiliation
Article Details
Issue: Vol 8 No 7 (2005)
Page No.: 75-80
Published: Jul 31, 2005
Section: Article
DOI: https://doi.org/10.32508/stdj.v8i7.3045
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Kostov, P., Atanasov, K., & Thanh Nam, N. (2005). NUMERICAL MODELLING CIRCULATION STREAMS UNDER ISOTHERMAL CONDITIONS. Science and Technology Development Journal, 8(7), 75-80. https://doi.org/https://doi.org/10.32508/stdj.v8i7.3045
Download Citation
Cited by
Article Statistics
HTML = 884 times
Download PDF = 379 times
Total = 379 times
Download PDF = 379 times
Total = 379 times
Most read articles by the same author(s)
- Nguyen Thanh Hao, Nguyen Thanh Nam, AN APPLICATION OF THE NUMERICAL SIMULATION OF TWO-PHASE NON-ISOTHERMAL SWIRLING TURBULENT JETS IN COMBUSTION CHAMBER , Science and Technology Development Journal: Vol 8 No 5 (2005)
