Viet Nam National University Ho Chi Minh City Logo

VNUHCM Journal of

Science and Technology Development

An official journal of Viet Nam National University Ho Chi Minh City, Viet Nam since 1997

ISSN: 1859-0128
Register Login
Article Open Access Logo

RESEARCH FOR IMPROVING THE MECHANICAL PROPERTIES OF NATURAL UBBER AND POLYPROPYLENE BLENDS 1. Case of using DCP, CPP, PEG and DOP

Phan Thanh Binh 1

Volume & Issue: Vol. 7 No. 1 (2004) | Page No.: 32-37 | DOI: 10.32508/stdj.v7i1.3149
Published: 2004-01-31

Online metrics

Statistics from the website

  • Abstract Views: 0
  • Galley Views: 0

Statistics from Dimensions

Statistics from PlumX
Copyright © 2004 by the author(s).

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

To improve the compatibility as forming NR-PP blends, the substances such as Dicumyl Peroxide (DCP), Polypropylene Chlorided (CPP), PolyEthylene Glycole (PEG), Diocthyl Phtalate (DOP) were used as additives to increase the compatibility. The results of researching on the mechanical properties of the NR-PP blends prove that the ultilization of peroxide (DCP) gives the best effect on improving the mechanical properties of NR-PP blends.

Comments