Open Access 
Downloads
Download data is not yet available.
Abstract
When chemical-heat treatment (CHT), details have to heat at high temperature and holding long time, thus they are usually becoming to brittlement. To quicken speed of CHT, may in addition to composition for CHT low melting temperature elements, then the temperature and the holding time of CHT are much reduced, while mechanical properties as hardness, brittlement are unabated. There is experiment to CHT multi elements Cr-Ti and Ti-V for hard alloy T15K6 with adding low melting temperature elements as Cd, Sb, is received suitable results.
Author's Affiliation
Article Details
Issue: Vol 5 No 3&4 (2002)
Page No.: 51-53
Published: Apr 30, 2002
Section: Article
DOI: https://doi.org/10.32508/stdj.v5i3&4.3415
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Ngoan, D. (2002). INTENSIFYING PROCESS OF METALLIC DIFFUSION WHEN CHEMICAL HEAT TREATMENT BY ADDING LOW MELTING TEMPERATURE ELEMENTS IN DIFFUSIVE COMPOSITION. Science and Technology Development Journal, 5(3&4), 51-53. https://doi.org/https://doi.org/10.32508/stdj.v5i3&4.3415
Download Citation
Cited by
Article Statistics
HTML = 1372 times
Download PDF = 316 times
Total = 316 times
Download PDF = 316 times
Total = 316 times
