Open Access

Downloads

Download data is not yet available.

Abstract

The static voltage stability analysis is carried out by V-Q sensitivity or Q-V modal analysis. These analyses are based on the Jacobian matrix of power flow calculation. This is regarded as load bus stability analysis. With DFIG of PQ mode, the wind generation bus is considered as the PQ bus. Due to the limits of converters, these PQ buses became very special and this influences on the voltage stability examining. This paper also examines the penetration level and the location of wind generation injection based on voltage stability. The reliability of the algorithm is illustrated in a study of 14 buses power network.



Author's Affiliation
Article Details

Issue: Vol 19 No 3 (2016)
Page No.: 5-12
Published: Sep 30, 2016
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v19i3.563

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Phan, B., Huynh, T., & Nguyen, A. (2016). Static analysis of voltage stability with DFIG. Science and Technology Development Journal, 19(3), 5-12. https://doi.org/https://doi.org/10.32508/stdj.v19i3.563

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1719 times
Download PDF   = 1438 times
Total   = 1438 times

Most read articles by the same author(s)