Open Access

Downloads

Download data is not yet available.

Abstract

In this report, we present the development of an environmental radiation monitoring system. The system includes Inspector+ dose meter, FPGA board, and LabVIEW interface. In the electronic board using FPGA, the embedded VHDL program is developed for FPGA board. Its functions are to accumulate pulse signals from the Inspector+, transmit data to the computer. Computer interface is written on LabVIEW platform. Its functions are to receive data from FPGA board, plot data, store data, as well as control the FPGA board. We evaluate the response of the system by using a standard pulse generator. With this system, we carry out the measurement of environmental background radiation in two experimental rooms and outside at Nuclear physics Department, University of Science, VNU-HCMC.



Author's Affiliation
Article Details

Issue: Vol 18 No 3 (2015)
Page No.: 29-35
Published: Aug 30, 2015
Section: Natural Sciences - Research article
DOI: https://doi.org/10.32508/stdj.v18i3.816

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Doan, N., Vo, H., & Nguyen, H. (2015). Development of environmental radiation monitoring system using inspector+ and FPGA board. Science and Technology Development Journal, 18(3), 29-35. https://doi.org/https://doi.org/10.32508/stdj.v18i3.816

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1431 times
Download PDF   = 756 times
Total   = 756 times