Open Access

Downloads

Download data is not yet available.

Abstract

This paper reports the development of a substation training simulation system. The simulation system operates on the basic of the combination of three software including Vijeo Designer, Unity Pro and Matlab. The first two software are used to simulate the Human Machine Interface (HMI) and Remote terminal Unit/Programmable Logic Controller ((RTU/PLC), respectively. The third software, Matlab, calculates parameters of different operating conditions of the substation. The system has been designed as a training device which allows users to gain hands on experience in relation to substation operation. It is also used as a tool to assess and enhance the skills of current substation operators. This simulation system is the first of its kind to be developed and applied in Vietnam.



Author's Affiliation
Article Details

Issue: Vol 18 No 3 (2015)
Page No.: 150-156
Published: Aug 30, 2015
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v18i3.896

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Nguyen, L., Dang, K., Ho, P., Nguyen, T., Tran, B., & Duong, N. (2015). Training simulation system for substation operation. Science and Technology Development Journal, 18(3), 150-156. https://doi.org/https://doi.org/10.32508/stdj.v18i3.896

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1549 times
Download PDF   = 749 times
Total   = 749 times