Open Access

Downloads

Download data is not yet available.

Abstract

The textile wastewater is one of the most complex wastewaters because it contains many persistant organic compounds. In this study, factors effect on UV/Fenton process were investigated including: concentration of H2O2, Fe2+, initial pH, time reaction and the stirring speed. Raw wastewater was aerated for 24 h and filtered by 20 μm filter paper before conducting reactions. The optimum conditions of the UV/Fenton process were attained at 660 mgH2O2/L and 20 mgFe2+/L, pH 3, 90 min irradiation time and 100 rpm stirring speed. Decolorisation and COD removal efficiencies were achieved 94.2 % and 75.5 %, respectively. The ratio of BOD5/COD was increased from 0.1 to 0.45. In addition, the effects of anions Cl-, SO4 2- on the efficient treatment were investigated. Both anions could inhibit the mineralization process due to scavenging of hydroxyl radical as well as forming strong complexes with iron ions.



Author's Affiliation
Article Details

Issue: Vol 18 No 4 (2015)
Page No.: 201-211
Published: Dec 30, 2015
Section: Natural Sciences - Research article
DOI: https://doi.org/10.32508/stdj.v18i4.950

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Le, V., Ly, P., & To, H. (2015). Textile wastewater treatment by UV/Fenton process. Science and Technology Development Journal, 18(4), 201-211. https://doi.org/https://doi.org/10.32508/stdj.v18i4.950

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 2066 times
Download PDF   = 2771 times
Total   = 2771 times