Open Access 
Downloads
Download data is not yet available.
Abstract
Natural rubber (NR), 30% epoxidized natural rubber (ENR30) and organoclays (Nanomer I28E and I30E) are blended in Brabender. Dispersions of the organoclay in NR are investigated by X – ray diffraction (XRD) and scanning electron microscopy (SEM). The results revealed the increase of dispersion efficiency by the addition of ENR30 as a compatibilizer. The existence of organoclay I28E reduces the vulcanization time, while torque value increases slightly and mechanical properties (abrasion resistance, modulus M100, modulus M300, tensile strength, tear strength) are improved considerably.
Author's Affiliation
Article Details
Issue: Vol 14 No 1 (2011)
Page No.: 30-38
Published: Mar 30, 2011
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v14i1.1858
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Pham, H., Do, S., & Nguyen, N. (2011). STRUCTURES AND PROPERTIES OF NATURAL RUBBER/ORGANOCLAY NANOCOMPOSITES. Science and Technology Development Journal, 14(1), 30-38. https://doi.org/https://doi.org/10.32508/stdj.v14i1.1858
Download Citation
Cited by
Article Statistics
HTML = 863 times
Download PDF = 489 times
Total = 489 times
Download PDF = 489 times
Total = 489 times
Most read articles by the same author(s)
- Nieu Huu Nguyen, Tien Tu Duong, Cuong Tien Nguyen, Duong Hoang Nguyen, RESEARCH INTO FABRICATION PA6/CLAY-NANOCOMPOSITES IN ORDER TO MAKE WATER LUBRICATED STERN TUBE BEARINGS , Science and Technology Development Journal: Vol 14 No 1 (2011)
