Open Access 
Downloads
Download data is not yet available.
Abstract
In this research, the preparations of PA6/Clay (4% namomer I.30TC) nanocomposites by melt-intercalation process were carried out. The mechanical properties, impact energy, heat deflection temperatures (HDT) and tribology properties of these nanocomposites in the case of being annealed and water saturation were determined and compared to PA6 and Capron. All of the properties of these nanocomposites were better than those of Russia’s Capron and PA6. These nanocomposites were used to make water lubricated stern tube bearings. The study shows promissing results.
Author's Affiliation
Article Details
Issue: Vol 14 No 1 (2011)
Page No.: 39-45
Published: Mar 30, 2011
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v14i1.1859
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Nguyen, N., Duong, T., Nguyen, C., & Nguyen, D. (2011). RESEARCH INTO FABRICATION PA6/CLAY-NANOCOMPOSITES IN ORDER TO MAKE WATER LUBRICATED STERN TUBE BEARINGS. Science and Technology Development Journal, 14(1), 39-45. https://doi.org/https://doi.org/10.32508/stdj.v14i1.1859
Download Citation
Cited by
Article Statistics
HTML = 1608 times
Download PDF = 609 times
Total = 609 times
Download PDF = 609 times
Total = 609 times
Most read articles by the same author(s)
- Hien Quang Pham, Son Thanh Thanh Do, Nieu Huu Nguyen, STRUCTURES AND PROPERTIES OF NATURAL RUBBER/ORGANOCLAY NANOCOMPOSITES , Science and Technology Development Journal: Vol 14 No 1 (2011)
