Open Access 
Downloads
Download data is not yet available.
Abstract
Fracture mechanics is a new branch in engineering. The development of modern mathematical background with different numerical methods has supported fracture mechanics to solve many complex fracture problems in practice effectively. This article introduces the application of quarter - point singular element in finite element method to simulate crack tip behavior in two dimensional problems. The ANSYS and FRANC2D programs are used to compute stress intensity factor, simulate the stress and displacement fields near crack tip and simulate crack propagation. The calculation results are compared with analytical results and the results in other articles.
Author's Affiliation
Article Details
Issue: Vol 13 No 2 (2010)
Page No.: 5-13
Published: Jun 30, 2010
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v13i2.2113
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Truong, T., & Tran, B. (2010). APPLICATION OF QUARTER-POINT SINGULAR ELEMENT IN FINITE ELEMENT METHOD TO SIMULATION OF CRACK TIP BEHAVIOR. Science and Technology Development Journal, 13(2), 5-13. https://doi.org/https://doi.org/10.32508/stdj.v13i2.2113
Download Citation
Cited by
Article Statistics
HTML = 1260 times
Download PDF = 597 times
Total = 597 times
Download PDF = 597 times
Total = 597 times
Most read articles by the same author(s)
- Thien Tich Truong, Bang Kim Tran, SIMULATION OF CRACK PROPAGATION IN TWO DIMENSIONAL PROBLEMS , Science and Technology Development Journal: Vol 13 No 4 (2010)
