Downloads
Abstract
This paper presents the design of a machine using for incremental sheet forming (ISF) technology. Mechanical design has differences compared with conventional CNC machine which has enough rigidity to match the high value of axial force when processing by ISF technology. The machine is manufactured successfully and operates stably when forming steel sheet of 210mm square and thickness of 1.5mm. It shows that the control and mechanical design presented shows appropriate and capable of manufacturing a machine with larger machining size to use for the actual sheet products in industries.
Issue: Vol 13 No 4 (2010)
Page No.: 25-33
Published: Dec 30, 2010
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v13i4.2174
Download PDF = 503 times
Total = 503 times
Most read articles by the same author(s)
- Tuyen Vo, Nam Thanh Nguyen, RESEARCH ON NUMERICAL SIMULATION FOR VELOCITY DISTRIBUTION OF SWIRLING TURBULENT JETS IN SPRAY IRRIGATION TECHNOLOGY , Science and Technology Development Journal: Vol 13 No 2 (2010)
- Hao Thanh Nguyen, Nam Thanh Nguyen, Jungkyu Park, A SIMULATION FOR PREDICTION THE NITROGEN OXIDE EMISSIONS IN LEAN PREMIXED COMBUSTOR , Science and Technology Development Journal: Vol 13 No 4 (2010)
- Tuan Dinh Phan, Binh Thien Nguyen, Dien Khanh Le, Phuong Hoang Pham, APPLYING THE ISF TECHNOLOGY TO PRODUCE THE CAR PART MODELS , Science and Technology Development Journal: Vol 13 No 4 (2010)