Open Access  

Downloads

Download data is not yet available.

Abstract

In the fact that Stage 1 freeze humidity materials of processing Freeze – Drying will be the most effect, when temperature of materials comes up to the optimal temperature of freeze, at that time free water of materials will be completely crystallized, therefore when finshed on stage 2 of processing Freeze – Drying free humidity of materials be crystallized to completely sublimated. Like this, how to determine free water of materials completely crystallized and optimal temperature of freeze in stage 1 of processing Freeze – Drying. For this reason, We researched the method to determine the ice ratio and optimal temperature in stage 1 freeze of processing freeze - Drying.

Author's Affiliation
Article Details

Issue: Vol 11 No 12 (2008)
Page No.: 74-86
Published: Dec 31, 2008
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v11i12.2718

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Dung, N., Dung, T., & Ba, T. (2008). RESEARCHED THE METHOD TO DETERMINE ICE RATIO IN MATERIALS FREEZE AND OPTIMAL TEMPERATURE OF FREEZE IN STAGE 1 OF PROCESSING FREEZE - DRYING. Science and Technology Development Journal, 11(12), 74-86. https://doi.org/https://doi.org/10.32508/stdj.v11i12.2718


 Download Citation
 Cited by

Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 855 times
Download PDF   = 361 times
Total   = 361 times