Open Access 
Downloads
Download data is not yet available.
Abstract
The article presents research result of manufacturing technology of solidified metter and frictional powder from Cashew Nut Shell Liquid (CNSL) to replace Phenol Formandehide (PF) resin and amiant, chemical, agent causing lung cancer and environment pollution which were used in friction - band. Collected result can be the fundamental to produce friction - band from CNSL natural raw materials which can be recycled. Moreover, this also helps to improve the effeciency of Cashew Nuts industry and solves environmental problems in Cashew Nuts manufacture in our country.
Author's Affiliation
Article Details
Issue: Vol 10 No 6 (2007)
Page No.: 59-65
Published: Jun 30, 2007
Section: Article
DOI: https://doi.org/10.32508/stdj.v10i6.2792
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Dung, T. (2007). STUDY ABOUT TECHNOLOGY APPLIED TO MANUFACTURE FRICTION - BAND FROM CASHEW NUT SHELL LIQUID. Science and Technology Development Journal, 10(6), 59-65. https://doi.org/https://doi.org/10.32508/stdj.v10i6.2792
Download Citation
Cited by
Article Statistics
HTML = 776 times
Download PDF = 378 times
Total = 378 times
Download PDF = 378 times
Total = 378 times
Most read articles by the same author(s)
- Nguyen Tan Dung, Trinh Van Dung, Tran Duc Ba, RESEARCHING THE METHOD TO DETERMINE THE RALATION BETWEEN ICE RATIO AND TEMPERATURE OF FREEZING , Science and Technology Development Journal: Vol 11 No 9 (2008)
- Nguyen Tan Dung, Trinh Van Dung, Tran Duc Ba, RESEARCHED THE METHOD TO DETERMINE ICE RATIO IN MATERIALS FREEZE AND OPTIMAL TEMPERATURE OF FREEZE IN STAGE 1 OF PROCESSING FREEZE - DRYING , Science and Technology Development Journal: Vol 11 No 12 (2008)
