Open Access  

Downloads

Download data is not yet available.

Abstract

Oscilloscope is a very important and popular measuring instrument for electronics and many other fields. It displays the waveform and various characteristics of signals. There are two kinds of oscilloscope: analog and digital. Digital oscilloscope is superior to analog one but is not as popular because of its higher cost. This paper presents the conversion of a PC into a two-channel digital oscilloscope, consisting of hardware which is a self-designed data acquision card, and the software which is a set of various programs written in Visual C++.

Author's Affiliation
Article Details

Issue: Vol 9 No 5 (2006)
Page No.: 21-32
Published: May 31, 2006
Section: Article
DOI: https://doi.org/10.32508/stdj.v9i5.2907

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Truong An, N., Thu Phuong, P., Huu Thuan, H., & Huu Phuong, N. (2006). CONVERTING A PC INTO TWO-CHANNEL DIGITAL OSCILLOSCOPE. Science and Technology Development Journal, 9(5), 21-32. https://doi.org/https://doi.org/10.32508/stdj.v9i5.2907


 Download Citation
 Cited by

Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1076 times
Download PDF   = 351 times
Total   = 351 times