Open Access 
Downloads
Abstract
The paper presents the results of application of CAD/CAE method for optimizing runners diameter of 16-pen-cup-cavity molds with unbalanced runners layout according to the Thien Long Company's requirement. The former mold has been unbalanced due to designing of unbalanced runners layout, machinning primary runners, secondary runners with equal diameters. The results of application of CAD/CAE method proposed the runners diameter to be modified for each secondary and primary runner separately in order to ensure a balanced runners system with minimuni runners volume. The results of product's injection implemented on the former and the modified mold showed the CAD/CAE method for optimizing runners diameter assured not only equal quality for all moulded products, decreasing resin consumption, but also noticeabbly decreasing injection cycle time and injection pressure.
Issue: Vol 9 No 8 (2006)
Page No.: 29-36
Published: Aug 31, 2006
Section: Article
DOI: https://doi.org/10.32508/stdj.v9i8.2932
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Download PDF = 376 times
Total = 376 times
Most read articles by the same author(s)
- Doan Thi Minh Trinh, Duong Vo Nhi Anh, APPLICATION OF THE CUBIC NURBS INTERPOLATION FOR FAIRING OF HIGH SPEED MACHINING TOOLPATH , Science and Technology Development Journal: Vol 9 No 7 (2006)
- Doan Thi Minh Trinh, Doan Le Ngoc Phi Lan, Le Quang Binh, CAD/CAE METHOD FOR OPTIMIZING RUNNERS DIAMETER OF MULTI-CAVITY MOLDS WITH UNBALANCED RUNNERS LAYOUT , Science and Technology Development Journal: Vol 8 No 3 (2005)
