Open Access 
Downloads
Download data is not yet available.
Abstract
Creating part of planting sugar cane semi-mechnic machine MTB-1,4 to be able studied to fabricate perfectly well MTB-1,4 planting machine. So far, opening row machine to be able fabricated to imtate according to working principle of moldboard plow. This machine is not satisfy the Agro-technical requirements. Study, design and fabricate creating opening row complicated of MTB-1,4 machine to ensur the Agro-technical requirements about row to put exactly seed sugar-cane in it, not only quantity but also place of seed sugar-cane in row.
Author's Affiliation
Article Details
Issue: Vol 6 No 3&4 (2003)
Page No.: 78-82
Published: Apr 30, 2003
Section: Article
DOI: https://doi.org/10.32508/stdj.v6i3&4.3319
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Quang Loc, N. (2003). DESIGN, FABRICATE CREATING PART AND FERTILIZING PART OF PLANTING SUGSR-CANE SEMI-MECHNIC MACHINE MTB-1,4. Science and Technology Development Journal, 6(3&4), 78-82. https://doi.org/https://doi.org/10.32508/stdj.v6i3&4.3319
Download Citation
Cited by
Article Statistics
HTML = 651 times
Download PDF = 498 times
Total = 498 times
Download PDF = 498 times
Total = 498 times
Most read articles by the same author(s)
- Nguyen Quang Loc, DESIGN, FABRICATE DISK HARROW X TYPE, BDT-3,0 MOUNTED ON TRACTORS MTZ-892 TO INCREASE QUALITY FOR TILLAGE , Science and Technology Development Journal: Vol 6 No 3&4 (2003)
