Open Access 
Downloads
Download data is not yet available.
Abstract
For tillage, soil harrowing is a compulsory operation to ensur the Agro technical requirments for crops. For a long time a harrow design for suitabl tillag has been neglected. It is necessary to design, fabricate a harrow muonted on tractors of over 80 HP power in order to ensur the Agro-technical requirments, to increase the field capacity, to reduce fuel cost. This has been the content of this study. The BDT-3,0 harrow has been designed, fabricated and put into operation and has met the demands.
Author's Affiliation
Article Details
Issue: Vol 6 No 3&4 (2003)
Page No.: 83-88
Published: Apr 30, 2003
Section: Article
DOI: https://doi.org/10.32508/stdj.v6i3&4.3321
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Quang Loc, N. (2003). DESIGN, FABRICATE DISK HARROW X TYPE, BDT-3,0 MOUNTED ON TRACTORS MTZ-892 TO INCREASE QUALITY FOR TILLAGE. Science and Technology Development Journal, 6(3&4), 83-88. https://doi.org/https://doi.org/10.32508/stdj.v6i3&4.3321
Download Citation
Cited by
Article Statistics
HTML = 870 times
Download PDF = 386 times
Total = 386 times
Download PDF = 386 times
Total = 386 times
Most read articles by the same author(s)
- Nguyen Quang Loc, DESIGN, FABRICATE CREATING PART AND FERTILIZING PART OF PLANTING SUGSR-CANE SEMI-MECHNIC MACHINE MTB-1,4 , Science and Technology Development Journal: Vol 6 No 3&4 (2003)
