Open Access

Downloads

Download data is not yet available.

Abstract

In this research, strontium hexa-ferrite nanoparticles (SrFe12O19) were synthesized by sol-gel method. The crystal structure, morphology and magnetic properties of nanoparticles were investigated using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Vibrating Sample Magnetometer (VSM). The XRD patterns confirmed the formation of single phase M-type hexagonal crystal structure for powders which was calcined above 700oC. The product shows the magnetization of 66 emu/g, which is consistent with pure hexa-ferrite obtained by other methods, and the magnetic coercivity of 6,145 kOe higher than expected for this hexa-ferrite. The powder morphology is composed of aggregates of hexagonal particles with an average particles size of above 100nm.



Author's Affiliation
Article Details

Issue: Vol 19 No 3 (2016)
Page No.: 5-10
Published: Sep 30, 2016
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v19i3.586

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Le, Q., Nguyen, V., Tran, H., & Huynh, H. (2016). Synthesis of SrFe12O19 by sol-gel method and its morphology and magnetic properties. Science and Technology Development Journal, 19(3), 5-10. https://doi.org/https://doi.org/10.32508/stdj.v19i3.586

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 2327 times
Download PDF   = 1136 times
Total   = 1136 times