Open Access 
Downloads
Download data is not yet available.
Abstract
This article deals with optimal nesting problem when irregular shapes are cut from strip metal sheet by using die stamping method. The objective of the research is minimizing the waste of material or maximizing the number of shapes cutting from metal sheet. By generating some mathematical models and building up their algorithms, the software for solving problem dedicates to a number of industries for saving the time and minimizing thewaste of material, and of course, increasing the productivity of manufacturing.
Author's Affiliation
Article Details
Issue: Vol 11 No 3 (2008)
Page No.: 79-87
Published: Mar 31, 2008
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v11i3.2623
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Anh Dung, T., Dang Bong, T., & Ngoc Tuan, P. (2008). OPTIMAL STRIP LAYOUT OF IRREGULAR SHAPES BY DIE STAMPING THEM FROM METAL SHEET. Science and Technology Development Journal, 11(3), 79-87. https://doi.org/https://doi.org/10.32508/stdj.v11i3.2623
Download Citation
Cited by
Article Statistics
HTML = 1056 times
Download PDF = 317 times
Total = 317 times
Download PDF = 317 times
Total = 317 times
Most read articles by the same author(s)
- Tran Dang Bong, Pham Ngoc Tuan, DESCRIBING THE CONTOUR OF IRREGULAR TWO-DIMENIONAL SHAPES BY USING SCANNER AND COMPUTER , Science and Technology Development Journal: Vol 11 No 3 (2008)
