Open Access

Downloads

Download data is not yet available.

Abstract

In this paper, we study on the effects of ZnO nanorods /seed ZnO on properties of hybrid solar cells. ZnO nanorods fabricated by electrochemical method of two-step stable flow of liquid Zn(NO3)2. 6H2O (0.005 M) and C6H12N4 (0.005 M). Morphology and optoelectronic properties of ZnO nanorods were studied by SEM images, UV-VIS transmission spectra, X-ray diffraction and photoluminescence spectrum. Elaboration of hybrid solar cells by inserting ZnO nanorods on organic photoactive layer of P3HT:PCBM and ITO, as result the solar cell conductivity performance is significantly improved. Experimental results show that ~ 1,392 mA/cm2 Jsc, Voc ~ 0.49 V, FF = 0.32, and PCE = 0.23%.



Author's Affiliation
Article Details

Issue: Vol 16 No 4 (2013)
Page No.: 5-12
Published: Dec 31, 2013
Section: Natural Sciences - Research article
DOI: https://doi.org/10.32508/stdj.v16i4.1598

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Tran, H., Le, K., Nguyen, D., Nguyen, T., Luu, K., Ha, T. C., Phan, B., Tran, T., Lam, Q., & Le, V. H. (2013). Synthesis of ZnO nanorods on ZnO/ITO seed layer by electrochemical method and its application in solar cell device. Science and Technology Development Journal, 16(4), 5-12. https://doi.org/https://doi.org/10.32508/stdj.v16i4.1598

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 133 times
Download PDF   = 307 times
Total   = 307 times

Most read articles by the same author(s)