Open Access

Downloads

Download data is not yet available.

Abstract

CrN film is used as a protective coating on material surfaces for its special properties such as high hardness, high thermal stability, high corrosion and wear resistance. CrN thin films were deposited by sputter ion plating on stainless steel substrates at deposition pressure of 9.10 torr. Thin films have good crystal structure, with preferred orientation on (111) planes parallel to sample surface. Crystal structure and adherence of Crn coatings depend on the nitrogen content in the sputtering gas and substrate bias. Thin films have high corrosion resistant in imitative mediums (acetate medium, sweaty medium).



Author's Affiliation
Article Details

Issue: Vol 10 No 5 (2007)
Page No.: 13-20
Published: May 31, 2007
Section: Article
DOI: https://doi.org/10.32508/stdj.v10i5.2778

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Mong Cam, D., Chi, N., Binh, L., Tuan, T., Hai Yen, N., & Trung, T. (2007). SYNTHESIS OF CrN HARD COATINGS BY SPUTTER ION PLATING. Science and Technology Development Journal, 10(5), 13-20. https://doi.org/https://doi.org/10.32508/stdj.v10i5.2778

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1192 times
Download PDF   = 387 times
Total   = 387 times